Table of Contents
Advertisement
MB86R02 'Jade-D' Hardware Manual V1.64
Note:
Each address field must not overlapped.
Bit15-8: Reserved
Reserved bits.
Write "0" to these bits. Their value is undefined.
Bit7-0: ADDR (Address)
These bits specify setting address in the corresponding chip select area. These
addresses (0x0200_0000 ~ 0x11FF_FFFF) are allocated by SRAM/Flash interface in
256MB fixed area. Define corresponding value to [27:20] part of the address.
ADDR (address[27:20])
0xFF
0xFE
~
0x21
0x20
0x1F
0x1E
~
0x01
0x00
*1: Address becomes [31:28] = 0 × 0 at ADDR (address [27:20] = 20 ~ FF setting.
*2: Address becomes [31:28] = 0 × 1 at ADDR (address [27:20] = 00 ~ 1F setting.
11-10
Setting address of chip selecting area
0x0FF0_0000 (*1)
0x0FE0_0000 (*1)
~
0x0210_0000 (*1)
0x0200_0000 (*1)
0x11F0_0000 (*2)
0x11E0_0000 (*2)
~
0x1010_0000 (*2)
0x1000_0000 (*2)
Advertisement
Table of Contents
