Example Control Flow - Fujitsu MB86R02 Jade-D Hardware Manual

Graphics controller

Hide thumbs Also See for MB86R02 Jade-D:

Table of Contents

MB86R02 'Jade-D' Hardware Manual V1.00

22.6.2 Example Control Flow

The following diagram shows the decision flow and configuration steps for a panel driver routine in

principle. Of course a lot of panel timing relevant parameters are configured at the DISP module. This

is not covered in this section.

Some decisions must already be taken when designing the board, selecting the used panel, driver ICs,

etc. The diagram does not show the detailed flow and exact order of configuration steps for one

application.

FUJITSU PROPRIETARY AND CONFIDENTIAL