Description; Distance - Dell Force10 Z9000 Reference Manual

Usage This command ensures that route information being redistributed is converted to the same
Information metric value.
Related redistribute
Commands

description

Enter a description of the RIP routing protocol.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults none
Command Modes ROUTER RIP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
7.7.1.0
Related router rip
Commands

distance

Assign a weight (for prioritization) to all routes in the RIP routing table or to a specific route. Lower weights
("administrative distance") are preferred.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax distance weight [ip-address mask [prefix-name]]
To return to the default values, use the no distance weight [ip-address mask]
command.
– allows you to redistribute routes learned by other methods.
Enter a description to identify the RIP protocol (80 characters
maximum).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
– enters ROUTER mode on the switch.
1239