Show Ip Route Preferences - Dell PowerEdge M420 Reference Manual

Default gateway is 10.1.20.1
S 0.0.0.0/0
C 10.1.20.0/24
C 20.1.20.0/24

show ip route preferences

Use the show ip route preferences command in Privileged EXEC mode
displays detailed information about the route preferences. Route preferences
are used in determining the best route. Lower router preference values are
preferred over higher router preference values.
The user can configure a global default gateway using the ip default-gateway
command, creating a default route with a preference of 253. The show ip
route preferences command lists the new preference value. The show
command also displays the preference of default routes learned from a DHCP
server.
Syntax
show ip route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays IP route preferences.
console#show ip route preferences
932
IP Routing Commands
[ ]
254/0 via 10.1.20.1
[ ]
0/1 directly connected,
[ ]
0/1 directly connected,
vlan2
vlan4