Add Port-Channel - Dell PowerEdge M420 Reference Manual

intf-list — List of Ethernet interfaces in unit/slot/port format. Separate
•
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid Ethernet interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-depend-1)#add tengigabitethernet 1/0/1

add port-channel

Use this command to add member port channels to the dependency list.
Syntax
add port-channel
no add port-channel
intf-list — List of port-channel numbers. Separate nonconsecutive port-
•
channels with a comma and no spaces. Use a hyphen to designate the
range of port-channels. (Range: Valid port-channel list or range)
port-channel-list — List of port-channel interfaces. Separate
•
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid port-channel interface list or
range)
Default Configuration
This command has no default configuration.
528
Link Dependency Commands
intf-list
port channel list