Show Ip Pim Rp Hash - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
(console)#show ip pim neighbor vlan 10
Neighbor Addr
--------------- ---------- --------- -----------
192.168.10.2
(FASTPATH) #show ip pim neighbor
Neighbor Addr
--------------- ---------
192.168.10.2
192.168.20.2
If no neighbors are learned on any of the interfaces, the following message is
displayed.
No neighbors are learned on any interface.

show ip pim rp hash

The show ip pim rp hash command displays the rendezvous point (RP)
selected for the specified group address.
Syntax
show ip pim rp hash
group-address — A valid multicast address supported by RP.
Default Configuration
There is no default configuration for this command.
1044
Multicast Commands
Interface
VLAN0010
Interface
VLAN0001
VLAN0010
group-address
Up Time
Expiry Time
hh:mm:ss
hh:mm:ss
00:02:55
Uptime
(HH:MM::SS) (HH:MM::SS)
----------- -----------
00:02:55
00:03:50
00:01:15
Expiry Time
00:01:15
00:02:10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents