Show Port Protocol - Dell PowerEdge M420 Reference Manual

2922

show port protocol

Use the show port protocol command in Privileged EXEC mode to display
the Protocol-Based VLAN information for either the entire system or for the
indicated group.
Syntax
show port protocol {
groupid — The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command.
• all — Enter all to show all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for
either the entire system.
console#show port protocol all
Group Name
---------------
test
734
VLAN Commands
Community A1
groupid
| all}
Group
ID Protocol(s
----- ----------
1 IP
untagged
VLAN
----
1
Static
Interface(s)
------------
1/0/1