Client-Name - Dell PowerEdge M420 Reference Manual

no client-identifier
Parameter Description
Parameter
unique-identifier
Default Configuration
This command has no default configuration.
Command Mode
DHCP Pool Configuration mode
User Guidelines
For Microsoft DHCP clients, the identifier consists of the media type
followed by the MAC address of the client. The media type 01 indicates
Ethernet media.
Use the show ip dhcp pool command to display pool configuration
parameters.
Example
console(config-dhcp-pool)#client-identifier
01:03:13:18:22:33:11
console(config-dhcp-pool)#host 192.168.21.34 32

client-name

Use the client-name command in DHCP Pool Configuration mode to specify
the host name of a DHCP client. Use the no form of the command to remove
the client name configuration.
Syntax
name
client-name
818
DHCP Server and Relay Agent Commands
Description
The identifier of the Microsoft DHCP client. The client
identifier is specified as 7 bytes of the form
XX:XX:XX:XX:XX:XX:XX where X is a hexadecimal digit.