Enable Password Encrypted - Dell PowerEdge M420 Reference Manual

Parameter Description
This command does not require parameter descriptions.
Default Behavior
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
This command has no user guidelines.
Example
console(config)#passwords strength exclude-keyword
brcm

enable password encrypted

This command is used by an Administrator to transfer the enable password
password
between devices without having to know the password. The
parameter must be exactly 128 hexadecimal characters.
Syntax
password
enable password encrypted
Parameter Description
This command does not require parameter descriptions.
Default Behavior
This command has no default configuration.
Command Mode
Privileged EXEC mode
1403
Password Management Commands