Clear Arp-Cache Management - Dell PowerEdge M420 Reference Manual

console#clear arp-cache gateway

clear arp-cache management

Use the clear arp-cache management command to clear all entries that show
as management arp entries in the show arp command.
Syntax
clear arp-cache management
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In the example below, out-of-band management entries are shown, i.e. those
from the service port.
console#show arp
Age Time (seconds)............................. 1200
Response Time (seconds).................... 1
Retries................................................... 4
Cache Size............................................ 6144
Dynamic Renew Mode ....................... Disable
Total Entry Count Current / Peak ...... 0 / 0
Static Entry Count Configured / Active / Max .. 0 / 0 / 128
807
ARP Commands