User Group Moveusers; User Group Name - Dell PowerEdge M420 Reference Manual

user group moveusers

Use the user group moveusers command to move a group's users to a different
group.
Syntax
group-id
user group
group-id — Group ID (Range: 1–10).
•
new-group-id —Group ID (Range: 1–10).
•
Default Configuration
There is no default configuration for this command.
Command Mode
Captive Portal Configuration mode
User Guidelines
The new group-id must already exist.
Example
console(config-CP)#user group 2 moveusers 3

user group name

Use the user group name command to configure a group name.
Syntax
group-id
user group
group-id — Group ID (Range: 1–10).
•
name — Group name (Range: 1–32 characters).
•
Default Configuration
User groups have no names by default.
1302
Captive Portal Commands
new-group-id
moveusers
name
name