Show Ipv6 Ospf - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Syntax
router-id
router-id
router-id — Router OSPF identifier. (Range: 0-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets a 4-digit dotted-decimal number identifying the
Router OSPF ID as 2.3.4.5.
console(config)#ipv6 router ospf
console(config-rtr)#router-id 2.3.4.5

show ipv6 ospf

Use the show ipv6 ospf command in Privileged EXEC mode to display
information relevant to the OSPF router.
Syntax
show ipv6 ospf [
area-id — Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode.
1180
OSPFv3 Commands
area-id
]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents