ipv6 pim bsr-candidate
Use the ipv6 pim bsr-candidate command to configure the router to advertise
itself as a bootstrap router (BSR). Use the no form of this command to return
to the default configuration.
Syntax
ipv6 pim bsr-candidate vlan {
no ipv6 pim bsr-candidate vlan {
Parameter Description
Parameter
vlan-id
hash-mask-len
bsr-priority
Default Configuration
None - The router does not advertise itself as an BSR candidate.
Command Mode
Global Configuration mode
User Guidelines
All multicast groups with the same hash value correspond to the same RP .
Lower priority values are preferred.
Example
console(config)#ipv6 pim bsr-candidate vlan 10 16 0
942
IPv6 PIM Commands
vlan-id hash-mask-len bsr-priority
vlan-id
Description
A valid VLAN identifier with multicast routing enabled.
The length of the BSR has to be AND'ed with the multicast
group address. Range 0-32. Default 0.
The advertised priority of the bsr-candidate. Range: 0–255.
Default 0.
}
}