show class-map
Use the show class-map command in Privileged EXEC mode to display all
configuration information for the specified class.
Syntax
show class-map [
classname — Specifies the valid name of an existing DiffServ class.
•
(Range: 1–31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configuration information for the class
named "Dell".
console#show class-map
Class Name
------------------------------- ----- ----- -----------------------
------
ipv4
ipv6
stop_http_class
match_icmp6
console#show class-map ipv4
634
QoS Commands
classname
]
Class L3
Type
Proto
All
ipv4
All
ipv6
All
ipv6
All
ipv6
Reference Class Name