Ip Igmp Snooping Querier Timer Expiry; Ip Igmp Snooping Querier Version - Dell PowerEdge M420 Reference Manual

ip igmp snooping querier timer expiry

This command sets the IGMP Querier timer expiration period which is the
time period that the switch remains in Non-Querier mode after it has
discovered that there is a Multicast Querier in the network. The no form of
this command sets the IGMP Querier timer expiration period to its default
value.
Syntax
ip igmp snooping querier timer expiry
no ip igmp snooping querier timer expiry
seconds — The time in seconds that the switch remains in Non-Querier
•
mode after it has discovered that there is a multicast querier in the
network. The range is 60–300 seconds.
Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the querier timer expiry time to 100 seconds.
console(config)#ip igmp snooping querier timer expiry
100

ip igmp snooping querier version

This command sets the IGMP version of the query that the snooping switch
is going to send periodically. The no form of this command sets the IGMP
Querier Version to its default value.
seconds
IGMP Snooping Querier Commands
455