Ipv6 Mld Query-Interval - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

User Guidelines
This command has no user guidelines
Example
console(config-if-vlan3)#ipv6 mld-proxy unsolicit-
rprt-interval 10

ipv6 mld query-interval

The ipv6 mld query-interval command sets the MLD router's query interval
for the interface. The query-interval is the amount of time between the
general queries sent when the router is querying on that interface. Use the
"no" form of this command to set the query interval to the default.
Syntax
query-interval
ipv6 mld query-interval
no ipv6 mld query-interval
query-interval — Query interval (Range: 1–3600).
Default Configuration
The default query interval is 125 seconds.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld query-interval 130
969
IPv6 Routing Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents