Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type
Router Id
----
--------
INTRA
3.3.3.3
INTRA
4.4.4.4
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area
areaid — Identifier for the OSPF area being displayed.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Cost
Area ID
----
--------
10
0.0.0.1
10
0.0.0.1
areaid
Next Hop
-----------------------
FE80::211:88FF:FE2A:3CB3
FE80::210:18FF:FE82:8E1
OSPFv3 Commands
Next Hop
Intf
-----
vlan11
vlan12
1185