The passive-interface default command enables the global passive mode by
default for all interfaces. It overrides any interface level passive mode. Use the
"no" form of this command to disable the global passive mode by default for
all interfaces. Any interface previously configured to be passive reverts to non-
no passive-interface default
Global passive mode is disabled by default.
Router OSPF Configuration mode.
There are no user guidelines for this command.
Use the passive-interface command to set the interface as passive. It
overrides the global passive mode that is currently effective on the interface.
Use the "no" form of this command to set the interface as non-passive.
no passive-interface vlan
vlan-id — The vlan number