Show Ipv6 Mld-Proxy Groups Detail - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Last Reporter
Up Time (in
secs)
Member State Possible values are:
Filter Mode
Sources
Example
console#show ipv6 mld-proxy groups
Interface................................ vlan 10
Group Address Last Reporter
------------- -------------- ---------- ----------------- ------------ -----
--
FF1E::1
FF1E::2
FF1E::3
FF1E::4

show ipv6 mld-proxy groups detail

Use the show ipv6 mld-proxy groups detail command to display information
about multicast groups that MLD Proxy reported.
Syntax
show ipv6 mld-proxy groups detail
Default Configuration
There is no default configuration for this command.
998
IPv6 Routing Commands
The IP address of the host that last sent a membership report for the
current group on the network attached to the MLD-Proxy interface
(upstream interface).
The time elapsed in seconds since last created.
• Idle_Member—The interface has responded to the latest group
membership query for this group.
• Delay_Member—The interface is going to send a group
membership report to respond to a group membership query for
this group.
Possible values are Include or Exclude.
The number of sources attached to the multicast group.
Up Time
FE80::100:2.3
00:01:40
FE80::100:2.3
00:02:40
FE80::100:2.3
00:01:40
FE80::100:2.3
00:02:44
Member State
DELAY_MEMBER
DELAY_MEMBER
DELAY_MEMBER
DELAY_MEMBER
Filter Mode
Sources
Exclude
Include
Exclude
Include
2
1
0
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents