Dell PowerEdge M420 Reference Manual page 996

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Syntax
show ipv6 mld-proxy
Command Mode
Privileged EXEC mode
Default Configuration
There is no default configuration for this command.
User Guidelines
The command displays the following parameters only when you enable MLD
Proxy:
Field
Interface Index
Admin Mode
Operational Mode Indicates whether MLD Proxy is operationally enabled or
Version
Number of
Multicast Groups
Unsolicited Report
Interval
Querier IP Address
on Proxy Interface
Older Version 1
Querier Timeout
Proxy Start
Frequency
Example
console#show ipv6 mld-proxy
996
IPv6 Routing Commands
Description
The interface number of the MLD Proxy interface.
Indicates whether MLD Proxy is enabled or disabled. This is a
configured value.
disabled. This is a status parameter.
The present MLD host version that is operational on the proxy
interface.
The number of multicast groups that are associated with the
MLD-Proxy interface.
The time interval at which the MLD-Proxy interface sends
unsolicited group membership reports.
The IP address of the Querier, if any, in the network attached to
the upstream interface (MLD-Proxy interface).
The interval used to timeout the older version 1 queriers.
The number of times the MLD-Proxy has been stopped and
started.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents