Sntp Trusted-Key - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the device to accept Simple Network Time
Protocol (SNTP) traffic from the server at IP address 192.1.1.1.
console(config)# sntp server 192.1.1.1

sntp trusted-key

Use the sntp trusted-key command in Global Configuration mode to
authenticate the identity of a system to which Simple Network Time Protocol
(SNTP) will synchronize. To disable authentication of the identity of the
system, use the no form of this command.
Syntax
sntp trusted-key
no sntp trusted-key
key-number — Key number of authentication key to be trusted. (Range:
1–4294967295)
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
1324
Clock Commands
key-number
key-number

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents