Ipv6 Mld-Proxy; Ipv6 Mld-Proxy Reset-Status - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld last-member-query-
interval 5000

ipv6 mld-proxy

Use the ipv6 mld-proxy command to enable MLD Proxy on the router. To
enable MLD Proxy on the router, you must also enable multicast forwarding.
Also, ensure that there are no other multicast routing protocols enabled on
the router. Use the "no" form of this command to disable MLD Proxy.
Syntax
ipv6 mld-proxy
no ipv6 mld-proxy
Default Configuration
MLD Proxy is disabled by default.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld-proxy

ipv6 mld-proxy reset-status

Use the ipv6 mld-proxy reset-status command to reset the host interface
status parameters of the MLD Proxy router. This command is only valid when
MLD Proxy is enabled on the interface.
967
IPv6 Routing Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents