Show Ip Dhcp Binding - Dell PowerEdge M420 Reference Manual

Syntax
ip-address
sntp
no sntp
Parameter Description
Parameter
ip-address
Default Configuration
There is no default IPv4 NTP server configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. The IPv4 address of the NTP server is conveyed in the Option 42
TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and DHCP
BOOTREPLY messages.
Example
console(config-dhcp-pool)#sntp 192.168.21.2

show ip dhcp binding

Use the show ip dhcp binding command in Privileged EXEC mode to display
the configured DHCP bindings.
Syntax
show ip dhcp binding [address]
Description
The IPv4 address of the NTP server to use for time services.
DHCP Server and Relay Agent Commands
837