There is no default configuration for this command.
Global Configuration mode
There are no user guidelines for this command.
console(Config)#ipv6 access-list rename DELL_IP6
The ipv6 traffic-filter command either attaches a specific IPv6 Access
Control List (ACL) to an interface or associates it with a VLAN ID in a given
An optional sequence number may be specified to indicate the order of this
access list relative to other IPv6 access lists already assigned to this interface
and direction. A lower number indicates higher precedence order. If a
sequence number is already in use for this interface and direction, the
specified IPv6 access list replaces the currently attached IPv6 access list using
that sequence number. If the sequence number is not specified for this
command, a sequence number that is one greater than the highest sequence
number currently in use for this interface and direction is used.
Use the "no" form of the command to remove an IPv6 ACL from the
interface(s) in a given direction.
no ipv6 traffic-filter
name — Alphanumeric string of 1 to 31 characters uniquely identifying
the IPv6 access list.
direction — Direction of the ACL. (Range: in or out)
IPv6 Access List Commands