Host - Dell PowerEdge M420 Reference Manual

host

Use the host command in DHCP Pool Configuration mode to specify a
manual binding for a DHCP client host. Use the no form of the command to
remove the manual binding.
Syntax
host ip-address [netmask|prefix-length]
no host
Parameter Description
Parameter
ip-address
netmask
prefix-length
Default Configuration
The default is a 1 day lease.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the client-identifier or hardware-address command prior to using this
command for an address pool. Use the show ip dhcp pool command to display
pool configuration parameters.
Example
console(config-dhcp-pool)#client-identifier
00:23:12:43:23:54
console(config-dhcp-pool)#host 192.168.21.131 32
Description
IPv4 address to be manually assigned to the host identified by
the client identifier.
An IPv4 address indicating the applicable bits of the address,
typically 255.255.255.255.
A decimal number ranging from 1-30.
DHCP Server and Relay Agent Commands
823