Dell PowerEdge M420 Reference Manual page 657

Default Configuration
The default deadtime interval is 0 minutes.
Command Mode
Radius mode
User Guidelines
If only one RADIUS server is configured, it is recommended to use a
deadtime interval of 0.
Example
The following example specifies a deadtime interval of 60 minutes.
console(config)#radius-server host 192.143.120.123
console(config-radius)#deadtime 60
key
Use the key command to specify the encryption key which is shared with the
RADIUS server. Use the "no" form of this command to remove the key.
Syntax
key-string
key
key-string — A string specifying the encryption key (Range: 0 - 128
•
characters).
Default Configuration
There is no key configured by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
657
RADIUS Commands