Boot Host Autoreboot - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

boot host autoreboot

Use the boot host autoreboot command in Global Configuration mode to
enable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded. Use the no form of this command to
disable rebooting the device (no administrative intervention) when the auto-
image is successfully downloaded.
Syntax
boot host autoreboot
no boot host autoreboot
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host autoreboot
console(config)#no boot host autoreboot
1264
Auto-Install Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents