The following table lists and describes reserved keywords.
This command has no default configuration.
Configuration and Image File Commands
Represents the current running configuration file.
Represents the startup configuration file.
Represents the startup syslog file. This can only be the source of a
Represents the operational syslog file. This can only be the source
of a copy operation.
Represents a CLI script file.
Represents the software image file. When "image" is the target of a
copy command, it refers to the backup image. When "image" is
the source of a copy command, it refers to the active image. If this
is destination, the file will be distributed to all units in the stack.
Source or destination URL for an FTP network server. The syntax
for this alias is ftp:
Source or destination URL for a TFTP network server. The syntax
for this alias is tftp:
band IP address can be specified as described in the User
Source for the file from a serial connection that uses the Xmodem
Source or destination URL for a file on a mounted USB file
system. Sub-directories are not supported on USB devices.
Source or destination URL for the switch flash-based file system.
Represents the backup configuration file.
Indicates which unit in the stack is the target of the copy
[[ //location ] /directory ] /filename
. An out-of-