Ip Igmp Snooping Querier Query-Interval - Dell PowerEdge M420 Reference Manual

console#vlan database
console(config-vlan)#ip igmp snooping querier
election participate

ip igmp snooping querier query-interval

This command sets the IGMP Querier Query Interval time, which is the
amount of time in seconds that the switch waits before sending another
periodic query. The no form of this command sets the IGMP Querier Query
Interval time to its default value.
Syntax
ip igmp snooping querier query-interval
no ip igmp snooping querier query-interval
interval–count — Amount of time in seconds that the switch waits before
•
sending another general query. (Range: 1-1800)
Default Configuration
The query interval default is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
The value of this parameter should be larger than the IGMP Snooping Max
Response Time.
Example
The following example sets the query interval to 1800:
console(config)#ip igmp snooping querier
query_interval 1800
454
IGMP Snooping Querier Commands
interval-count