Show Ipv6 Pimsm Rphash - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Neighbor Address...............................
FE80::200:FF:FE00:33
Up Time (hh:mm:ss).............................
00:00:12
Expiry Time (hh:mm:ss).........................
00:01:34
DR Priority.................................... 0

show ipv6 pimsm rphash

Use the show ipv6 pimsm rphash command to display which rendezvous
point (RP) is being selected for a specified group.
Syntax
group-address
show ipv6 pimsm rphash
group-address
— Group IP address supported by RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm rphash ff1e::/64
RP
Type
Address
------------------------ -----
1062
IPv6 Multicast Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents