Http Port; Https Port - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Example
console(config-CP)#enable

http port

Use the http port command to configure an additional HTTP port for captive
portal to monitor. Use the "no" form of this command to remove the
additional HTTP port from monitoring.
Syntax
port-num
http port
no http port
port-num —The port number to monitor (Range: 1–65535).
Default Configuration
Captive portal only monitors port 80 by default.
Command Mode
Captive Portal Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#http port 81
console(config-CP)#no http port

https port

Use the https port command to configure an additional HTTPS port for
captive portal to monitor. Use the "no" form of this command to remove the
additional HTTPS port from monitoring.
Syntax
port-num
https port
1275
Captive Portal Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents