Show Ip Address-Conflict - Dell PowerEdge M420 Reference Manual

• Host name. (Range: 1–255 characters). The command allows spaces in the
host name when specified in double quotes. For example,
console(config)#snmp-server host "host name"
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about IP hosts.
console>show hosts
Host name:
Default domain: gm.com, sales.gm.com, usa.sales.gm.com
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host
--------------------------
accounting.gm.com
Cache:
Host
----------------
www.stanford.edu

show ip address-conflict

Use the show ip address-conflict command in User EXEC or Privileged
EXEC mode to display the status information corresponding to the last
detected address conflict.
Syntax
show ip address-conflict
474
IP Addressing Commands
Addresses
----------------------------
176.16.8.8
TTL (Hours)
Total Elapsed
----- -------
72 3
Type Addresses
------- -------------
IP 171.64.14.203