Boot Host Retrycount - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Install process is triggered. Use the no form of this command to disable Auto-
Install on the next reboot if the reboot occurs with a saved startup
configuration. If you give this command while the Auto-Install process is
running, the Auto-Install process terminates. The Auto-Install process has an
internal timer that retries failed installations for ten minutes.
Syntax
boot host dhcp
no boot host dhcp
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Enabled.
Command Mode
Global Configuration.
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host dhcp
console(config)#no boot host dhcp

boot host retrycount

The boot host retrycount command sets the number of attempts to
download a configuration. Use the no form of this command to reset the
number of attempts to download a configuration to the default.
1266
Auto-Install Commands

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents