Show Ip Igmp Snooping Querier - Dell PowerEdge M420 Reference Manual

Syntax
ip igmp snooping querier version
no ip igmp snooping querier version
version — IGMP version. (Range: 1–2)
•
Default Configuration
The querier version default is 2.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the IGMP version of the querier to 1.
console(config)#ip igmp snooping querier version 1

show ip igmp snooping querier

This command displays IGMP Snooping Querier information. Configured
information is displayed whether or not IGMP Snooping Querier is enabled.
If a querier is active in the network and IGMP snooping querier is enabled,
the querier's IP address is shown in the Last Querier Address field.
Syntax
show ip igmp snooping querier [detail | vlan
Syntax Description
Parameter
vlan_id
When the optional argument
following information.
456
IGMP Snooping Querier Commands
version
Description
Specifies a VLAN ID value.
vlan_id
vlan_id
]
is not used, the command shows the