Show Sntp Configuration; Commands In This Chapter; Show Sntp Server; Show Sntp Status - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

the link-local scoped IANA multicast address ff02::101 (reserved for SNTP)
for server packets.The client logic to handle packet contents doesn't change
with support for IPv6 networks.

Commands in this Chapter

This chapter explains the following commands:

show sntp configuration

show sntp server

show sntp status

sntp authenticate

sntp authentication-key
sntp broadcast client enable
sntp client poll timer
sntp server
show sntp configuration
Use the show sntp configuration command in Privileged EXEC mode to
show the configuration of the Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
1316
Clock Commands
sntp trusted-key
sntp unicast client enable
clock timezone hours-offset
no clock timezone
clock summer-time recurring
clock summer-time date
no clock summer-time
show clock

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents