No Clock Timezone - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

clock timezone hours-offset
Use the clock timezone [ hours-offset ] [minutes
acronym
] command to set the offset to Coordinated Universal Time (UTC).
If the optional parameters are not specified, they will be read as either '0' or
'\0, as appropriate.
Syntax
clock timezone hours-offset [minutes
hours-offset — Hours difference from UTC. (Range: –12 to +13)
minutes-offset — Minutes difference from UTC. (Range: 0–59)
acronym — The acronym for the time zone. (Range: Up to four
characters)
Command Mode
Global Configuration
Default Value
No default setting
User Guidelines
No specific guidelines
Example
console(config)#clock timezone -5 minutes 30 zone IST

no clock timezone

Use the no clock timezone command to reset the time zone settings.
Syntax
no clock timezone
Default Configuration
This command has no default configuration.
1326
Clock Commands
minutes-offset
minutes-offset
] [zone
] [zone
acronym
]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents