Show Mvr Interface - Dell PowerEdge M420 Reference Manual

MVR Group IP
------------------
224.1.1.1
console#show mvr members 224.1.1.1
MVR Group IP
------------------
224.1.1.1

show mvr interface

Use the show mvr interface command in Privileged EXEC mode to display
the MVR enabled interfaces configuration.
Syntax
show mvr interface [
Parameter Description
Parameter
Interface-id
VID
The following table explains the output parameters.
Parameter
Port
Type
Status
Status
---------------
INACTIVE
Status
---------------
INACTIVE
interface-id
[members [vlan
Description
Identifies a specific interface.
VLAN identifier.
Multicast VLAN Registration Commands
Members
---------------------
1/0/1, 1/0/2, 1/0/3
Members
---------------------
1/0/1, 1/0/2, 1/0/3
vid ]] ]
Description
Interface number
The MVR port type. It can be None,
Receiver, or Source type.
The interface status. It consists of two
characteristics:
active or inactive indicating if port is
1
forwarding.
inVLAN or notInVLAN indicating if the
2
port is part of any VLAN
561