Default-Information Originate - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

Default Configuration
1 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a 20-second transmit delay for the OSPF
virtual interface on the virtual interface identified by area 1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 transmit-
delay 20

default-information originate

Use the default-information originate command in Router OSPFv3
Configuration mode to control the advertisement of default routes. Use the
no form of the command to return the default route advertisement settings
to the default value.
Syntax
default-information originate [always] [metric
type-value]
no default-information originate [metric] [metric-type]
Syntax Description
Parameter
always
metric-value
seconds
.
Description
Always advertise default routes.
The metric (or preference) value of the default route. (Range:
1–16777214)
metric-value
] [metric-type
OSPFv3 Commands
1159

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents