Network - Dell PowerEdge M420 Reference Manual

Parameter Description
Parameter
type
Default Configuration
There is no default NetBIOS node type configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the show ip dhcp pool command to display pool configuration
parameters. The NetBIOS node type information is conveyed in the Option
46 TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and
DHCP BOOTREPLY messages. Supported NetBIOS node types are:
• broadcast (b-node)
• peer-to-peer (p-node)
• mixed (m-node)
• hybrid (h-node)
Example
console(config-dhcp-pool)#netbios-node-type h-node

network

Use the network command in IP DHCP Pool Configuration mode to define a
pool of IPv4 addresses for distributing to clients.
Syntax
network-number
network
830
DHCP Server and Relay Agent Commands
Description
The NetBIOS node type can be b-node, h-node, m-node or p-
node.
mask prefix-length
[ | ]