Ip Dhcp Pool; Commands In This Chapter - Dell PowerEdge M420 Reference Manual

• Internet access cost is greatly reduced by using automatic assignment as
Static IP addresses are considerably more expensive to purchase than are
automatically allocated IP addresses.
• Using DHCP a centralized management policy can be implemented as the
DHCP server keeps information about all the subnets. This allows a
system operator to update a single server when configuration changes take
place.

Commands in this Chapter

This chapter explains the following commands:

ip dhcp pool

bootfile
clear ip dhcp
binding
clear ip dhcp
conflict
client-identifier
client-name
default-router
ip dhcp pool
Use the ip dhcp pool command in Global Configuration mode to define a
DHCP address pool that can be used to supply addressing information to
DHCP clients. Upon successful completion, this command puts the user into
DHCP Pool Configuration mode. Use the no form of the command to
remove an address pool definition.
812
DHCP Server and Relay Agent Commands
dns-server (IP
DHCP Pool
Config)
domain-name (IP
DHCP Pool
Config)
hardware-address
host
ip dhcp bootp
automatic
ip dhcp conflict
logging
ip dhcp excluded-
address
ip dhcp ping
packets
lease
netbios-name-
server
netbios-node-type show ip dhcp conflict
network
next-server
option
service dhcp
sntp
show ip dhcp binding
show ip dhcp global
configuration
show ip dhcp pool
show ip dhcp server
statistics