Arp Resptime - Dell PowerEdge M420 Reference Manual

Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example removes the specified IP address from arp cache.
console#arp purge 192.168.1.10

arp resptime

Use the arp resptime command in Global Configuration mode to configure
the ARP request response timeout. To return the response timeout to the
default value, use the no form of this command.
Syntax
integer
arp resptime
no arp resptime
integer — IP ARP entry response time out. (Range: 1-10 seconds)
•
Default Configuration
The default value is 1 second.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a response timeout of 5 seconds.
console(config)#arp resptime 5
804
ARP Commands