Vlan Routing - Dell PowerEdge M420 Reference Manual

Syntax
vlan protocol group remove
groupid — The protocol-based VLAN group ID, which is automatically
•
generated when you create a protocol-based VLAN group with the vlan
protocol group command. To see the group ID associated with the name
of a protocol group, use the show port protocol all command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the removal of the protocol-based VLAN
group identified as "2."
console(config)#vlan protocol group remove 2

vlan routing

Use the vlan routing command to enable routing on a VLAN. Use the no
form of this command to disable routing on a VLAN.
Syntax
vlan routing {vlanid [ index]}
Parameter Description
Parameter
vlanid
754
VLAN Commands
groupid
Description
Valid VLAN ID (Range 1–4093).