Mark Cos - Dell PowerEdge M420 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify that matching packets are to
be dropped at ingress.
console(config-policy-classmap)#drop

mark cos

Use the mark cos command in Policy-Class-Map Configuration mode to
mark all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header. If the packet does not
already contain this header, one is inserted.
Syntax
cos-value
mark cos
cos-value — Specifies the CoS value as an integer. (Range: 0–7)
•
Default Configuration
There is no default cos-value for this command. Packets are not remarked by
default.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
612
QoS Commands