acct-port
Use the acct-port command to set the port that connects to the RADIUS
accounting server. Use the "no" form of this command to reset the port to the
default.
Syntax
port
acct-port
no acct-port
port — The layer 4 port number of the accounting server (Range: 1 -
•
65535).
Default Configuration
The default value of the port number is 1813.
Command Mode
Radius (accounting) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets port number 56 for accounting requests.
console(config)#radius-server host acct 3.2.3.2
console(Config-acct-radius)#acct-port 56
auth-port
Use the auth-port command in Radius mode to set the port number for
authentication requests of the designated Radius server.
Syntax
auth-port-number
auth-port
RADIUS Commands
655