Rmon Event - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

console(config)#interface gigabitethernet 1/0/8
console(config-if-1/0/8)#rmon collection history 1
interval 2400

rmon event

Use the rmon event command in Global Configuration mode to configure an
event. To remove an event, use the no form of this command. See also the
show rmon events command.
Syntax
rmon event number [log] [trap
string
]
number
no rmon event
Parameter Description
Parameter
number
log
trap
community
description string
owner string
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
community
Description
The event index. (Range: 1–65535)
An entry is made in the log table for each event.
An SNMP trap is sent to one or more management stations.
If an SNMP trap is to be sent, it is sent to the SNMP
community specified by this octet string. (Range: 0-127
characters)
A comment describing this event. (Range 0-127 characters)
Enter a name that specifies who configured this event. If
unspecified, the name is an empty string.
string
] [description
RMON Commands
] [owner
1417

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents