Rmon Commands; Commands In This Chapter; Rmon Alarm; Rmon Collection History - Dell PowerEdge M420 Reference Manual

RMON Commands

The PowerConnect SNMP component includes an RMON (remote
monitoring) agent. RMON is a base technology used by network
management applications to manage a network. Troubleshooting and
network planning can be accomplished through the network management
applications. The network monitor monitors traffic on a network and records
selected portions of the network traffic and statistics. The collected traffic
and statistics are retrieved using SNMP . The data collected is defined in the
RMON MIB, RFC 2819. A device that supports gathering and reporting the
RMON data is referred to as an RMON probe or RMON Agent. An RMON
probe provides RMON data to an RMON Manager for analysis and
presentation to the user. An RMON probe may be embedded in an existing
network device or stand-alone.

Commands in this Chapter

This chapter explains the following commands:

rmon alarm

rmon collection history

rmon event

show rmon alarm
show rmon alarms
rmon alarm
Use the rmon alarm command in Global Configuration mode to configure
alarm conditions. To remove an alarm, use the no form of this command. See
also the related show rmon alarm command.
show rmon collection history
show rmon events
show rmon history
show rmon log
show rmon statistics
RMON Commands
73
1413