Parameter
index
Default Configuration
Routing is not enabled on any VLANs by default.
Command Mode
VLAN Database mode
User Guidelines
The user is not required to use this command. Routing can still be enabled
using the routing command in VLAN Interface Configuration mode.
Examples
console(config-vlan)# vlan routing 10 1
Description
Internal interface ID. This optional parameter is listed in the
configuration file for all VLAN routing interfaces. When a
nonstop forwarding failover occurs, this information enables
the system to correlate checkpointed state information with the
proper interfaces and their configuration.
VLAN Commands
755