Mvr Group - Dell PowerEdge M420 Reference Manual

mvr group

Use the mvr group command in Global Config mode to add an MVR
membership group. Use the no form of the command to remove an MVR
membership group.
Syntax
A.B.C.D
mvr group
A.B.C.D
no mvr group
Parameter Description
Parameter
A.B.C.D
count
Default Configuration
This command has no default configuration.
Command Mode
Global Config
User Guidelines
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message
Example
console(config)#mvr
count
[ ]
count
[ ]
Description
Specify a multicast group.
Specifies the number of multicast groups to configure. Groups
are configured contiguously by incrementing the first group
specified.
Multicast VLAN Registration Commands
Message Description
None
• Not an IP multicast group address
• Illegal IP multicast group address
551