Area Nssa Translator-Stab-Intv - Dell PowerEdge M420 Reference Manual

Dell powerconnect m6220/m6348/m8024/m8024-k cli reference guide
Hide thumbs Also See for PowerEdge M420:
Table of Contents

Advertisement

console(config-rtr)#area 1 nssa translator-role
always

area nssa translator-stab-intv

Use the area nssa translator-stab-intv command in Router OSPFv3
Configuration mode to configure the translator stability interval of the NSSA.
The stability interval is the period of time that an elected translator continues
to perform its duties after it determines that its translator status has been
deposed by another router.
Syntax
areaid
area
nssa translator-stab-intv
areaid
no area
areaid — Valid OSPF area identifier.
seconds — Translator stability interval of the NSSA. (Range: 0-3600
seconds)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a translator stability interval of 100 seconds
for the area 1 NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 nssa translator-stab-intv
100
1150
OSPFv3 Commands
nssa translator-stab-intv
seconds

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents