Dhcpv6 Commands; Clear Ipv6 Dhcp - Dell PowerEdge M420 Reference Manual

DHCPv6 Commands

This chapter explains the following commands:

clear ipv6 dhcp

dns-server (IPv6 DHCP Pool Config)
domain-name (IPv6 DHCP Pool Config) show ipv6 dhcp binding
ipv6 dhcp pool
ipv6 dhcp relay
ipv6 dhcp server
prefix-delegation
clear ipv6 dhcp
Use the clear ipv6 dhcp command in Privileged EXEC mode to clear
DHCPv6 statistics for all interfaces or for a specific interface.
Syntax
clear ipv6 dhcp {statistics | interface vlan
vlan-id — Valid VLAN ID.
•
statistics — Indicates statistics display if VLAN is specified.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 0 / 1 1 - F O R P R O O F O N LY
Template Last Updated - 2/7/2007
service dhcpv6
show ipv6 dhcp
show ipv6 dhcp interface (User EXEC)
show ipv6 dhcp interface (Privileged
EXEC)
show ipv6 dhcp pool
show ipv6 dhcp statistics
vlan-id
statistics}
DHCPv6 Commands
42
843